Causes Of Bolt (anchor Bolt) Slip

Aug 15, 2023 Leave a message

From the manufacturer's perspective, it may be due to the poor quality of the screws and wires we use, or it may be due to the hexagonal socket bolts being punched out, rubbed into the teeth, and directly plated without being hardened. From the customer's perspective, it may be due to the excessive force exerted by the hexagonal spoon on the head of the hexagonal bolt when the customer is using it. Or the depth of the hexagonal spoon and the inner hexagon bolt does not match in all aspects.

Bolt Slip Scheme

Acceptance Of Bolts (anchor Bolts)

Send Inquiry

Spring Washer Zinc Plated
Spring washers zinc plated are a subtype of washers that are conical in shape to prevent them from resting flush against a surface without the presence of a load. They are designed to provide a spring force and absorb shock by providing an axial load that counters vibrations.
Rebar Coupler
Rebar couplers are components which connect two reinforcing bars in longitudinal direction, forming a mechanical splice. This is an alternative to lap splices or welded connections. Mechanical splices are used to avoid protruding bars in casting joints, reduce congestion in confined spaces and to save rebar length.
Hex Bolt Galvanized
The hex bolt galvanized has the six sided hexagonal shaped head. This is a machine threaded bolt typically used with a nut or in a pre-threaded hole. The grade 2 hex bolts are a low or medium carbon steel, externally threaded bolt that has been hot dipped galvanized to provide superior anti-corrosive protection while being used in highly corrosive environments.